SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Industrial Jib
Industrial Jib - Forklift jibs allow the operator to reach over obstacles with the intention to put their very heavy loads on decks, roofs or elevated platforms. They're typically used to reach through second or even third story doorways or windows to lift and move loads to places still under construction. Fork truck jibs are really used so as to deliver trucks and flatbed trailers, to suspend trusses and laminate wood. Jibs are also typically used for reaching over scaffolding for masonry work.
Each forklift jib attachment is equipped with two swivel hooks. One of the hooks can be manually fixed on the bottom of the boom at whichever position whereas the other hook stays connected at the end of the jib. This permits the person operating it to carry objects that have two hook points. Dependent on the size of the model, each and every hook is rated at either four thousand or six thousand lbs. It's possible to utilize either a hook or even both in order to lift a load. The person operating it must make certain that the whole weight of the jib and the load will not go beyond the rated capacity of the jib as shown on the load chart for that retracted or extended position.
Attachments jibs can be used on extendable-reach lift trucks, rough terrain straight-mast lift trucks or on industrial forklifts. The forklift jib cranes can be fitted onto the forklift by way of inserting both of the forks into the fork pockets. The rear of the jib crane then seats towards the back of the fork and a safety chain wraps the forklift carriage to hold it into position.
Load Capacity for the Jib Boom Forklift Attachment
The load capacity of a forklift jib has a maximum of about 1935 lbs to as much as 6000 pounds on either the retracted or extended positions range. You might need to consult with a material handling specialist regarding the particular limits of your forklift application. The load capacity rankings are really intended for the jib itself and not the lift truck or even the utmost load that could be lifted safely using a certain forklift. It is important to keep in mind that at any time when whatever attachments such as a forklift jib are fitted to the lift truck, the new center of gravity made by the attachment will decrease the general lift capability of the forklift. There are directions available which provide information on the way to properly estimate these load limits.
Fork Trucks & Fork lift Attachment Safe Usage
Prior to utilizing a forklift jib, ensure that it is correctly secured to the forklift with the use of hooks and shackles. Continuously be sure in order to verify that the screw pins are tight. It is very important to even make sure that the weight calculations have been done correctly. Bear in mind to take into account the fact that rated capacities at times lessen every time the boom is in an elevated position, when the boom is fully extended with telehandlers or whenever the mast is slanted frontward.
A few essential tips about the modifiable jib are: don't ever pull a load using a lift truck jib attachment, since these kinds of attachments are actually used for vertical lift only. All the time lift the load without letting it sway. Utilize extreme caution any time a load is lifted in order to prevent tipping over the truck.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
forkliftpartsvermont.com
Email Us
About Us